PLC CTS7-200 CPU226L_24DIx16DO_relay output 0.75A, 220VAC
New PLCCompatible with Siemens expansion modules, the CTSC-200 is a new generation of very affordably priced, high-performance PLCs with excellent characteristics, multi-protocol communication ports and a wide range of instructions. This generation of PLCs can satisfy a huge number of industry requirements and is adaptable to the complex control demands of small and medium-sized control systems. IMPORTANT! Considering that the CTSC7-200 is practically identical to the Siemens Simatic S7 series, both new and existing programmers of the Siemens CPU family use the same instruction set, so this PLC series can be programmed with either MicroWin or MagicWorks software. For both new and experienced programmers we provide the complete Siemens S7 PLC PDF manual, downloadable HERE. A Siemens S7 PLC seminar paper with a programming guide and solved exercises can be downloaded HERE. The latest version of the COTRUST MagicWorks-PLC software can be downloaded HERE. The PDF operating manual can be downloaded HERE. Technical specifications can be downloaded HERE. Information about our cooperation with the CO-TRUST company can be found at THIS link. Excellent communication capabilities: Ethernet communication mode: 10/100Mbps Ethernet supports the MODBUS_TCP and UDP_PP protocols, with multiple host network communications on a LAN for programming, debugging and remote monitoring over a WAN. PPI communication mode: the CTSC-200 series has one or two integrated PPI ports hardware-linked to RS485 or RS232, enabling communication at 9.6Kbps or 187Kbps. PPI is a marked closed network structure that can form a PPI network without relays to complete data exchange through NETR and NETW. Each exchanged packet is max. 200 bytes. Up to eight modules can be connected to each CPU, meaning every CPU allows a connection to up to eight PCs or other CPU units!! Data exchange is extremely fast precisely because of these strong communication capabilities. MPI (multi point interface) communication mode: CTSC-200 series CPUs can connect to an MPI network with a communication rate of 19.2KBit/s and 187Kbps, and can only work as a SLAVE station in the MPI network. Different SLAVE stations cannot communicate with each other, while the MASTER station can read data from the SLAVE stations. Profibus-DP or Ethernet communication mode: the CPU can be connected to Profibus via a DP SLAVE station, enabling real-time data exchange. The CPU can be connected to an industrial Ethernet via an Ethernet module matching the architecture of other applications with several stations in the system. CANopen communication mode: by forming a network via a CANopen MASTER station, up to 32 SLAVE stations or other devices can be connected at speeds of up to 1Mbit/s over 25 meters, or 20Mbit/s over 2500 meters. Freeport communication mode: CTSC-200 CPUs have 1-2 freeports, using a library of several free protocols such as Modbus, USS, etc. The CPU226L and CPU226H, with two freeports, can communicate simultaneously, which is useful e.g. for high-speed communication and synchronized control of a large number of peripheral devices. Stable and economical: Anti-ESD and anti-EFT, CE certified, adapted for strict industrial environments. Permanent protection of user data and programs, multi-layer encrypted protection, one-way download function, high cost-effectiveness. High speed and large capacity: bit instruction speed up to 0.15us, FLOATING-POINT calculation speed up to 8us. 16KB to 72KB of program memory. Base memory from 8 to 10KB, expandable up to 100KB. Highly expandable for various needs: the control system allows an interrupt time of 1s, making it extremely usable in high-speed loop applications. HIGH SPEED COUNTER: 2-6 channels, 30KHz-200KHz. High-speed pulse output: 2-4 channels, 20KHz-200KHz. High level of intelligence: auto-tuning of an unknown PID library for logical temperature control. No need for programming and it does not take up any additional program or data memory. The auto-tuning PID parameter is adapted to a wide range of temperature controls. The logic function algorithm, temperature control accuracy and good dynamic properties can be applied to up to 64 loops!! An excellent example of use is in plastics machines, welding machines, glass processing machines, casting and drying furnaces, etc. Generally speaking, the Wizard PID library with auto-tune function executes commands in 18us, a real-time characteristic that will satisfy requirements from slow to extremely fast closed-loop applications. The CPU226H CPU, with a six-channel HIGH-SPEED input pulse and a four-channel HIGH-SPEED output pulse at a maximum frequency of up to 200KHz, has a subroutine library such as RETURN TO ZERO, POSITION, SYNCHRONIZE, linear and circular interpolation, constant interpolation, etc., applicable to the most complex motion control and positioning tasks. Powerful expansion capabilities: Digital I/O up to 128DI/128DO, analog up to 32AI/32AQ. Up to 7 expansion I/O modules. Convenient programming: supports the IEC61131 programming language. Programming languages: ladder diagram LAD, instruction list STL, sequential function chart FBD. English language. Intelligent help. A wealth of instructions: 144 basic and 99 applied instructions, floating-point calculation instructions, a CPU data exchange wizard, an HMI interface wizard. Co-Trust is a leading Chinese manufacturer of PLCs. By purchasing this device you get 18 months of warranty, as well as online and phone support. We will never let you down! Your Inverter Elektronika team
